Maintenance
Below is a checklist of recommended inspections. Before installation, any person working on the pump should carefully read the ‘Operations & Maintenance Manual’, available via our downloads section.
-
That the pump does not vibrate or emit jarring sounds.
That there is no cavitation inside the pump casing.
That any circulation pipes – cooling, heating or pressurized pipes are in working order.
That power output and power consumption are correct.
That flow and operational pressure is correct.
That the max allowed temperature is observed.
-
That the bearings do not have too much play
That the relief valve, if any, functions correctly and opens at the right pressure.
That the screw gland is intact.
-
That any filters and drainage holes are clean.
That mechanical shaft seals are not leaking.
Whether the connecting elements are worn.
-
All parts for wear and tear.
That all parts are located correctly in connection with assembly.