Information Request Form Information Request Form

To assist us in selecting the correct pump for your application please provide as much information as possible about your application on the form below.
   
*Contact Name:
Company Name:
*Address:
Postcode:
*Telephone No:
Fax No:
*Email Address:  
Min Nominal Max Units
Flow Rate:
Output Pressure:
Fluid Being Pumped:
Condition of the Fluid:
Viscosity of the Fluid:
Operating Temperature:
Pressure Relief Valve:
External: Internal: None
           
Adjustable: Pre-set: N/A
Suction Conditions:
In all pump installations flooded suction is preferred. If not, please give details of suction conditions - suction pump size, total length, vertical lift, plus any other restrictions such as strainers or valves. 
Pump Drive Method:
Please give type, i.e.electric, pneumatic, etc. If using an existing prime mover please state the desired speed (rpm). For an electric motor please describe the available power supply, AC/DC, Volts, Hz, Phase.
Application:
Please describe the application and the type of machine with which the pump will be used.
Boxes marked * must be completed before sending the form. If all the details are filled in correctly please send the information to us by clicking the button below. You will receive a page confirming receipt of your message.
  
    

To whom it may concern.

Our business is conducted directly with original equipment manufacturers, end users and reputable merchants. We do not employ independent "agents". Should you be contacted by any party purporting to represent us with an "offer of employment" or suggestions for any business transaction which may or may not include financial incentives, of any kind, then you should be fully aware that this will have absolutely nothing to do with us.