Enquiries

To assist us in selecting the correct pump for your application, please provide as much information as possible about your application on the form below.

Enquiry Form

Boxes marked * must be completed before sending the form. If all the details are filled in correctly please send the information to us by clicking the button below. You will receive a page confirming receipt of your message.

Contact Details

*Contact Name:

Company Name:

*Address:

*Post Code:

*Telephone No:

Fax No:

*Email:

Application Details

Min

Norminal

Max

Units

Flow Rate:

Output Pressure:

Fluid Being Pumped:

Condition of the Fluid:

Visocosity of the Fluid:

Operating Temperature:

Pressure Relief Value:

External

Internal

None

Adjustable

Pre-set

N/A

Suction Conditions:

In all pump installations flooded suction is preferred. If not, please give details of suction conditions - suction pump size, total length, vertical lift, plus any other restrictions such as strainers or valves.

Pump Drive Method:

Please give type, i.e. electric, pneumatic, etc. If using an existing prime mover please state the desired speed (rpm). For an electric motor please describe the available power supply, AC/DC, Volts, Hz, Phase.

Application:

Please describe the application and the type of machine with which the pump will be used.

Please leave this box empty:

Enquiries

Enquiry Form

Contact Details

Application Details

About us